收藏本站
A.2.1 2 × 20 Character LCD
The 2 × 20 display does not have a backlight, so the jumpers on header J7 do not need to
be set, and may be left in place as is. This display uses the dual-row 2 × 8 connector. Two
ways are available to attach the display to the Keypad/Display interface.
1. To attach the 2 × 20 display directly to the Keypad/Display interface, solder a 2 × 8
socket to the bottom side of the display printed circuit board (the side that does not
have the actual display). The display can now be attached to the Keypad/Display inter-
face at header J4. Make sure that pin one on the display is aligned with pin 1 on J4.
2. A 6" flat ribbon cable (included with the Expansion Kit) can also be used to attach the
2 × 20 display. The cable has 2 × 8 female IDC connectors at each end. To use the
cable, solder a 2 × 8 header to the top side of the display printed circuit board (the same
side that has the actual display). Now you can use the 6" flat ribbon cable to connect the
display to header J4 on the Keypad/Display interface, making sure that pin 1 is con-
nected to pin 1 on both sides.
When you port this design to your own use, the ribbon cable can be up to 2 m long.
The LCDBASIC.C and PONG.C sample programs illustrate the use of the 2 × 20 display.
A.2.2 4 × 20 Character LCD
The 4 × 20 display has an LED backlight, and the factory-default jumpers at J7 are already
set to provide the necessary series resistance for the LED backlight. (The factory default is
for 2-pin jumpers across pins 3–4, 5–6, and 9–10, which provides a series resistance of
5.0 ? .)
The 4 × 20 display uses a 1 × 16 in-line connector interface. Three ways are available to
attach the display to the Keypad/Display interface.
1. Solder one end of the 1 × 16 male-male 4" flex strip into either the top or bottom side of
the LCD display printed circuit board. Press the other end is into the socket strip at J5
on the Keypad/Display interface. When installing the flex strip into J5, work from one
end towards the other, inserting 3 or 4 pins as you go. The flex strip provides a tight fit
to the socket strip. Make sure that pin 1 is connected to pin 1 on both ends of the cable.
When you port this design to your own use, the flex strip can be up to 2 m long.
2. The display can be connected directly to the Keypad/Display interface by first soldering
a 1 × 16 Hi-Rel pin strip onto the bottom side of the display printed circuit board (the
side that does not have the actual display). The pins on one side of the pin strip have a
slightly larger diameter than the pins on the other side. Solder the larger pins into the
display. Next press the display with the pin strip installed into J5 on the Keypad/Display
interface. Make sure that pin 1 is connected to pin 1 on both sides. The pin strip pro-
vides a tight fit. Working from the display side of the display, press directly above the
pins while working back and forth across the connector until it is fully seated into J5 on
the Keypad/Display interface. The connection was designed to be tighter than normal
so the display can stand off the side of the Keypad/Display interface without bending.
The ALPHANUM.C sample program illustrates the use of the 4 × 20 character display.
User ’s Manual
151
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
101-0954 KIT DEV RABBIT RCM3360/3370 INTL
101-1050-BE-00025 ADPT USB 2 A FEMALE-2 5PIN .25M
10112627-101LF MINI-SAS HD 1X2 EXT PCB
10112628-101LF MINI-SAS HD 1X4 EXT PCB
10136-3000PC CONN MINI-D 36POS SOLDER PLUG
10136-6000EC CONN MDR PLUG 36POS IDC GOLD
10150-4CZ3PL CONN MDR PLUG 50POS VERT T/H
10150-72E2PC CONN MINI-D 50POS R/A PLUG
相关代理商/技术参数
101-0689 功能描述:开发板和工具包 - 其他处理器 Serial-to-Ethernet RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-0690 功能描述:KIT SERIAL-ETHERNET APPLICATION RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:RabbitCore 3000 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板
101-0691 功能描述:模块化系统 - SOM RCM3300 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
101-0697 功能描述:单板计算机 BL2102 Bottom Mnt RoHS:否 制造商:Ampro By ADLINK 外观尺寸:EPIC 处理器类型:Intel Atom D510 频率:1.66 GHz 存储容量:2 GB (max) 存储类型:DDR2, L2 Cache 接口类型:Ethernet, PS/2, SATA, Serial, USB 工作电源电压:5 V, 12 V 功耗:13 W 最大工作温度:+ 70 C 尺寸:165.1 mm x 114.3 mm
101-0698 功能描述:模块化系统 - SOM RCM3310 RABBITCORE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
10-106C 制造商:Datak Corporation 功能描述:
10106DC 制造商:Freescale Semiconductor 功能描述:10106DC
10106F 制造商:North American Philips Discrete Products Div 功能描述:Logic Circuit, Dual 3-Input NOR, 16 Pin, Ceramic, DIP